ARIES ActionTrac powered running boards are unique from other power side steps because they are actually two steps in one. This patented step-within-a-step design -- combined with a no-drill bracket installation, control module operation and powder-coated aluminum construction -- truly makes these retractable running boards an asset for the offroad truck or Jeep, particularly as lifted truck steps. ActionTrac powered running boards have one 4" wide step on top of the main housing and one 3" wide that automatically deploys as needed. When the door opens, the control module deploys the power step 8" below the main step, 15" below the doorsill, depending on the model. This two-step design offers enhanced safety and easier vehicle entry and exit, especially on large, lifted vehicles. It's also very helpful for families with young children and for elderly passengers. The boards contour to the vehicle and offer extra protection for the rocker panels from small road debris. For additional safety, the module is able to detect any obstructions during operation to avoid pinch hazards. LED lights are also built into the housing to illuminate the steps when deployed. ARIES ActionTrac powered running boards are made for vehicle-specific installation for a custom fit. They use pre-existing factory holes for the brackets to eliminate drilling. They also do not require any splicing into factory wiring. These particular running boards fit specific years of the Chevrolet Tahoe (see application info to verify fitment). Each set is constructed from powder-coated aluminum to be strong, lightweight and non-corrosive. The quiet, maintenance-free rotary motor is shielded within the main housing, along with the power step pivot points and all electrical components, protecting them from the harsh elements. NOTE: Boards, brackets and wiring are included.
| Description_ABR |
ATRAC |
| Description_ASC |
ActionTrac 69.6" Powered Running Boards, Select Chevrolet Tahoe |
| Description_ASM |
ARIES 3048103 ActionTrac 69.6-Inch Retractable Powered Running Boards, Fits Select Chevrolet Tahoe |
| Description_DES |
ActionTrac 69.6" Powered Running Boards, Select Chevrolet Tahoe |
| Description_EXT |
ARIES 3048103 ActionTrac 69.6-Inch Retractable Powered Running Boards, Fits Select Chevrolet Tahoe |
| Description_INV |
ActionTrac Powered Running Boards |
| Description_KEY |
powerstep trucks bed board kit replacement rails powersteps pickup bars auto amps hide getting battery self lift electricrunning plugs climbing electirc open close exterior bar rail retract powe nerf electricstep e sides oem |
| Description_MKT |
ARIES ActionTrac powered running boards are unique from other power side steps because they are actually two steps in one. This patented step-within-a-step design -- combined with a no-drill bracket installation, control module operation and powder-coated aluminum construction -- truly makes these retractable running boards an asset for the offroad truck or Jeep, particularly as lifted truck steps. ActionTrac powered running boards have one 4" wide step on top of the main housing and one 3" wide that automatically deploys as needed. When the door opens, the control module deploys the power step 8" below the main step, 15" below the doorsill, depending on the model. This two-step design offers enhanced safety and easier vehicle entry and exit, especially on large, lifted vehicles. It's also very helpful for families with young children and for elderly passengers. The boards contour to the vehicle and offer extra protection for the rocker panels from small road debris. For additional safety, the module is able to detect any obstructions during operation to avoid pinch hazards. LED lights are also built into the housing to illuminate the steps when deployed. ARIES ActionTrac powered running boards are made for vehicle-specific installation for a custom fit. They use pre-existing factory holes for the brackets to eliminate drilling. They also do not require any splicing into factory wiring. These particular running boards fit specific years of the Chevrolet Tahoe (see application info to verify fitment). Each set is constructed from powder-coated aluminum to be strong, lightweight and non-corrosive. The quiet, maintenance-free rotary motor is shielded within the main housing, along with the power step pivot points and all electrical components, protecting them from the harsh elements. NOTE: Boards, brackets and wiring are included. |
| Description_SHO |
ActionTrac Boards |
| Description_SLA |
ARIES ActionTrac powered running boards are unique from other power side steps because they are actually two steps in one. This patented step-within-a-step design -- combined with a no-drill bracket installation, control module operation and powder-coated aluminum construction -- truly makes these retractable running boards an asset for the offroad truck or Jeep, particularly as lifted truck steps. ActionTrac powered running boards have one 4" wide step on top of the main housing and one 3" wide that automatically deploys as needed. When the door opens, the control module deploys the power step 8" below the main step, 15" below the doorsill, depending on the model. This two-step design offers enhanced safety and easier vehicle entry and exit, especially on large, lifted vehicles. It's also very helpful for families with young children and for elderly passengers. The boards contour to the vehicle and offer extra protection for the rocker panels from small road debris. For additional safety, the module is able to detect any obstructions during operation to avoid pinch hazards. LED lights are also built into the housing to illuminate the steps when deployed. ARIES ActionTrac powered running boards are made for vehicle-specific installation for a custom fit. They use pre-existing factory holes for the brackets to eliminate drilling. They also do not require any splicing into factory wiring. These particular running boards fit specific years of the Chevrolet Tahoe (see application info to verify fitment). Each set is constructed from powder-coated aluminum to be strong, lightweight and non-corrosive. The quiet, maintenance-free rotary motor is shielded within the main housing, along with the power step pivot points and all electrical components, protecting them from the harsh elements. NOTE: Boards, brackets and wiring are included. |
| Description_ASC |
ActionTrac 69.6" Powered Running Boards, Select Chevrolet Tahoe |
| Description_ASC |
Patented step-within-a-step design for easier access, especially on large vehicles |
| Description_ASC |
3" powered step automatically drops 8" when door opens, up to 15" below doorsill |
| Description_ASC |
4" top step provides convenient access to the roof of the vehicle |
| Description_ASC |
Housing shields retractable step, pivot points and electronics from the elements |
| Description_ASC |
Contoured design helps protect the rocker panels from road debris and door dings |
| Description_ASC |
Simple-2-install system with no-drill brackets and no-splice wiring |
| Description_ASC |
Powder-coated 6061-T6 aluminum is durable, lightweight and non-corrosive |
| Description_ASC |
Integrated control module detects obstructions and eliminates pinch hazards |
| Description_ASC |
Single, rotary motor for fast, quiet, maintenance-free operation |
| Description_ASC |
Integrated LED lights activate on deployment for added visibility and safety |
| Description_ASC |
Rated for 650 lbs. static weight capacity (limited to mounting structure) |
| Description_ASC |
Limited lifetime warranty (five-year finish and three-year parts) |
| Description_ASC |
Assembled in USA |
| Description_ASC |
Patent# US 9771024, US 8833781, D718195, D751953 |
| Description_DEF |
Step Nerf Bar Kit |
