Complete System, we pride ourselves on delivering complete and detail oriented performance brake solutions to our consumers. We do not cut any corners. To give an example of this, we assemble the hubs prior to sending them to you, installing all the bearings and races, packing them with Redline synthetic grease. When we send you your brake system, everything is already installed, all you have to do it bolt it onto the control arms.
Specifications:
| Axle |
Rear |
| Box Count |
2 |
| Brand |
Baer Brakes |
| Caliper |
6S Red Shelby |
| Category |
Brake |
| Emission Code |
6 |
| Export Description |
Brake Components |
| Min Wheel Dia (verify using template) |
18 |
| part type |
Disc Brake Upgrade Kit |
| Prop 65 - Long Label |
WARNING: This product can expose you to chemicals including Toluene Diisocyanate, and Nickel which are known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov |
| Rotor Diameter |
14 |
| Rotor Surface |
SDZ |
| Sub Category |
Service Kits |
| System Notes |
Small bearing 9IN with 5 on 4.5 and 5 on 4.75 BC. Does not include park brake cables does include Park Brake |
| Template |
N085P |
| Title |
Extreme+ Brake System Rear |
| Description_SHO |
Ext+ RRS w park |
| Description_INV |
14" Ext+ Brake Sys RR Red Ford 8"/9" |
| Description_ASC |
Ships in 2 Boxes |
| Description_DES |
Baer Brakes 14" Extreme+ Rear Brake Kit - Red w/Shelby Logo |
| Description_EXT |
Fits Rear Ends w/Ford 8"/9" Small Bearing Housing Ends, (5x4.5", 5x4.75"BC) |
| Description_MKT |
Complete System, we pride ourselves on delivering complete and detail oriented performance brake solutions to our consumers. We do not cut any corners. To give an example of this, we assemble the hubs prior to sending them to you, installing all the bearings and races, packing them with Redline synthetic grease. When we send you your brake system, everything is already installed, all you have to do it bolt it onto the control arms. |
| Description_FAB |
Forged 1-Piece Monoblock, 6-Piston, 6S Caliper |
| Description_FAB |
Manufactured in Phoenix, AZ from US Sourced Materials |
| Description_FAB |
Powder Coated Finish w/Shelby Logo |
| Description_FAB |
Stainless Steel Pistons, Abutments and Noise Suppression Clips |
| Description_FAB |
Staggered Pistons to Minimize Uneven Pad Wear |
| Description_FAB |
Dual Seals, Dust/Weather & Pressure |
| Description_FAB |
2-Piece Slot, Drilled, Zinc-Plate Rotor w/Billet Aluminum Hat |
