Pressure residual valves are designed to maintain a small amount of line pressure needed in certain situations. The 2lb valve would be used with disc brakes whenever the master cylinder is mounted below or level with the calipers to prevent possible fluid drain back which can result in excessive pedal travel (4 wheel disc brake vehicle would use 2 valves, one in the front and on in the rear circuit). A 10lb valve would be used in any drum brake circuit no matter of the master cylinder location. Pressure residual valves are machined out of billet aluminum, are available with 3/8-24 inverted flare female or -3AN male threads and have a Black anodized finished.. Billet aluminum frame mounts are available separately.
| Box Count |
1 |
| Box Count |
1 |
| Brand |
Baer Brakes |
| Brand |
Baer Brakes |
| Category |
Vehicles, Equipment, Tools, and Supplies |
| Category |
Vehicles, Equipment, Tools, and Supplies |
| Emission Code |
6 |
| Emission Code |
6 |
| Export Description |
Brake Components |
| Export Description |
Brake Components |
| Finish |
Black Anodized |
| Finish |
Black Anodized |
| Grade Type |
Premium |
| Grade Type |
Premium |
| Includes |
1x Residual Valve |
| Includes |
1x Residual Valve |
| Inlet Diameter |
3/8-24 IFF |
| Inlet Diameter |
3/8-24 IFF |
| Material |
Billet aluminum |
| Material |
Billet aluminum |
| Mounts Included |
No |
| Mounts Included |
No |
| part type |
Brake Hydraulic System Pressure Bleeder Master Cylinder Adapter |
| part type |
Brake Hydraulic System Pressure Bleeder Master Cylinder Adapter |
| Pressure |
10 Pounds |
| Pressure |
10 Pounds |
| Product Line |
Residual Valve |
| Product Line |
Residual Valve |
| Product Type |
Residual Valve |
| Product Type |
Residual Valve |
| Prop 65 - Short Label |
WARNING: Cancer Harm - www.p65warnings.ca.gov |
| Prop 65 - Short Label |
WARNING: Cancer Harm - www.p65warnings.ca.gov |
| Quantity |
1 |
| Quantity |
1 |
| Sub Category |
Hardware, Fasteners and Fittings |
| Sub Category |
Hardware, Fasteners and Fittings |
| Title |
Baer Brakes Pressure Residual Valve – Billet Aluminum, 10#, 3/8-24 IF Female |
| Title |
Baer Brakes Pressure Residual Valve – Billet Aluminum, 10#, 3/8-24 IF Female |
| Universal Or Specific Fit |
Universal |
| Universal Or Specific Fit |
Universal |
| Warning |
California Proposition 65 |
| Warning |
California Proposition 65 |
| Description_INV |
Residual Pressure Valve 10lb 3/8 IFF |
| Description_DES |
Pressure Residual Valve - 10LB, 3/8 IFF Fittings |
| Description_EXT |
Billet Aluminum w/Black Anodized Finish |
| Description_MKT |
Pressure residual valves are designed to maintain a small amount of line pressure needed in certain situations. The 2lb valve would be used with disc brakes whenever the master cylinder is mounted below or level with the calipers to prevent possible fluid drain back which can result in excessive pedal travel (4 wheel disc brake vehicle would use 2 valves, one in the front and on in the rear circuit). A 10lb valve would be used in any drum brake circuit no matter of the master cylinder location. Pressure residual valves are machined out of billet aluminum, are available with 3/8-24 inverted flare female or -3AN male threads and have a Black anodized finished.. Billet aluminum frame mounts are available separately. |
| Description_FAB |
10-Pound Valve |
| Description_FAB |
3/8-24 IF Female Fitting |
| Description_FAB |
Billet Aluminum |
| Description_FAB |
Black Anodized Finish |
| Description_INV |
Residual Pressure Valve 10lb 3/8 IFF |
| Description_DES |
Pressure Residual Valve - 10LB, 3/8 IFF Fittings |
| Description_EXT |
Billet Aluminum w/Black Anodized Finish |
| Description_MKT |
Pressure residual valves are designed to maintain a small amount of line pressure needed in certain situations. The 2lb valve would be used with disc brakes whenever the master cylinder is mounted below or level with the calipers to prevent possible fluid drain back which can result in excessive pedal travel (4 wheel disc brake vehicle would use 2 valves, one in the front and on in the rear circuit). A 10lb valve would be used in any drum brake circuit no matter of the master cylinder location. Pressure residual valves are machined out of billet aluminum, are available with 3/8-24 inverted flare female or -3AN male threads and have a Black anodized finished.. Billet aluminum frame mounts are available separately. |
| Description_FAB |
10-Pound Valve |
| Description_FAB |
3/8-24 IF Female Fitting |
| Description_FAB |
Billet Aluminum |
| Description_FAB |
Black Anodized Finish |
