This black powder coated SBC Corvette road race pan is for pre-?80 blocks with left side dipstick. It is designed for 84-96 Corvettes, but will fit in early Corvettes as well. It has a 7" deep, 13-3/4" wide, 12" long sump, with a 7 quart system capacity. Will work with stock starters. This pan requires one of our pickups.
Specifications:
| Baffled |
Yes |
| Material |
16 Gauge Steel |
| Sump Width |
13.75 inches |
| Sump Depth |
7 inches |
| Stoke |
3.75 inches |
| Recommended Accessory 8 |
88-100 - SBC Pre ?85 Oil Pan Gasket |
| Recommended Accessory 7 |
22-405 - 20MM Plug for Oil Level Sender Port |
| Recommended Accessory 6 |
20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 5 |
20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 4 |
20-079 - Pickup for SBC High Volume Oil Pump M155HV with 3/4" Inlet |
| Recommended Accessory 3 |
20-074 - Pickup for SBC High Volume Oil Pump M55HV |
| Recommended Accessory 2 |
20-049 - Pickup for SBC Standard Volume Oil Pump M155 with 3/4" Inlet |
| Recommended Accessory 1 |
20-044 - Pickup for SBC Standard Volume Oil Pumps M55 & M55A |
| Pickup Included |
No |
| Kicked Out |
Yes |
| Capacity |
7 Quart System Capacity |
| Hardware Included |
No |
| Gasket or Seal Included |
No |
| Finish |
Black Powdercoat |
| Feature 6 |
20mm Fitting for GM Low Oil Warning Sender |
| Feature 5 |
Provision for Pan Mounted Dipstick |
| Feature 4 |
1/2" NPT Temperature Bung |
| Feature 3 |
Bolt in Windage Tray |
| Feature 2 |
Crank Scraper |
| Feature 1 |
Trap Door Baffle for Oil Control |
| Engine |
For S.B. Chevy Pre-1980 Blocks |
| Drain Plug Included |
Yes |
| Dipstick Port |
Yes |
| Crank Scraper Included |
Yes |
| Windage Tray Included |
Yes |
| Description_ABR |
- |
| Description_SHO |
SB Chevy Oil Pan |
| Description_INV |
SBC CORVETTE RR PAN BLK |
| Description_ASC |
N/A |
| Description_KEY |
Canton, Canton Racing, Products |
| Description_LAB |
Canton Racing Products |
| Description_DES |
Canton 15-240BLK Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan |
| Description_SHP |
N/A |
| Description_ASM |
- |
| Description_EXT |
Canton 15-240BLK Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan |
| Description_MKT |
This black powder coated SBC Corvette road race pan is for pre-?80 blocks with left side dipstick. It is designed for 84-96 Corvettes, but will fit in early Corvettes as well. It has a 7" deep, 13-3/4" wide, 12" long sump, with a 7 quart system capacity. Will work with stock starters. This pan requires one of our pickups. |
| Description_FAB |
Five Trap Door Baffles |
| Description_FAB |
Crank Scraper |
| Description_FAB |
Built In Screen Windage Tray |
| Description_FAB |
1/2" NPT Temperature Bung |
| Description_FAB |
Provision For Our Pan Mounted Dipstick |
| Description_FAB |
Magnetic Drain Plug |
| Description_FAB |
Includes a 20MM fitting For A Low Oil Warning Sender (Purchase 22-405 Plug if not using sender) |
| Description_TRA |
- |
| Description_CAP |
- |
| Description_DEF |
Engine Oil Pan |
