Your bicycle is more than just a frame, tires, handlebars and pedals. You live for what might be around that next turn, that burn in your legs as you climb a rocky trail and that freefall feeling you get as you descend a long hill. Your bike is not just a hobby; it is a gateway to the outdoors and your faithful companion in the wild. It was with this idea in mind that the CURT tray-style bike rack was built. The CURT hitch-mounted tray-style bike rack promotes your biking experience unlike any other because of its unique, three-point support system. It is made to be easier to use and keep bikes more secure, holding them at three points of contact. Instead of hanging the bike by its crossbar, the loop-like tray-style cradles hole the bike's wheels, keeping it secure on each end. The third point is an adjustable, ratcheting arm that moves up and down and locks over the crossbar, keeping the entire bike firmly held in place. Both the tray-style cradles and the vertical ratcheting arm are highly adjustable and can fit virtually any size bike, from a giant adult mountain bike to a single-gear kids' bike. CURT tray-style bike racks are not your average ten-speed. In fact, they are packed with features to truly make it all about the ride. They feature a hitch-mounted design to work with your vehicle's trailer hitch, and they come with a tilt-away feature to allow the entire rack to tilt away from the vehicle. This makes it easy to open a hatchback door or trunk and access the rear cargo area. Tray-style bike racks also feature a foldable, adjustable frame and an anti-wobble shank. This model fits 2" receiver tubes and holds two or four bikes with the extension. NOTE: For use with any frame-mounted 2" class 3 or higher trailer hitch receiver. Clamp-on bumper receivers and traditional 4" square bumpers should not be used to mount bike racks. Do not exceed receiver weight limits.
| Prop 65 Label Text - XA |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Prop 65 Material - XA |
Lead |
| Prop 65 Reason - XA |
Keys |
| Prop 65 Warning Label Type - XA |
Cancer and Birth Defect Causing |
| Prop 65 Warning Y/N - XA |
YES |
| Rate Class - XA |
85.0 |
| Receiver Tube Size |
2 IN |
| Retail Height - XA |
12.500 |
| Retail Length - XA |
39.000 |
| Retail Width - XA |
23.500 |
| Sales Family Code - XA |
CARGO |
| Sales Family Description - XA |
CARGO ACCESSORIES |
| Sales Group Description - XA |
BIKE RACKS |
| Shipping Weight - XA |
86.000 |
| Side Application Type Description - XA |
Blank |
| Tariff 301 - XA |
Yes |
| Tilt |
Yes |
| Title |
Tray-Style Hitch-Mounted Bike Rack (4 Bikes, 2" Shank) |
| Truckload Cases Qty - XA |
0 |
| Truckload Pallets Qty - XA |
0 |
| Truckload Units Qty - XA |
0 |
| Truckload Volume Cubic Feet - XA |
0.00000 |
| Truckload Weight - XA |
0 |
| Warranty |
Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Box Height in Inches - XA |
0 |
| Box Length in Inches - XA |
0 |
| Box Width in Inches - XA |
0 |
| Class ID |
0 |
| 17 |
Black |
| Container Cases Qty - XA |
0 |
| Container Pallet Qty - XA |
0 |
| Container Unit Qty - XA |
0 |
| Container Volume Cubic Feet - XA |
0.00000 |
| Container Volume Cubic Meter - XA |
0.00000 |
| Container Weight KG - XA |
0 |
| Container Weight Lbs - XA |
0 |
| Finish - XA |
CARBIDE BLACK POWDER COAT |
| Item Class - XA |
OBS |
| Item Height - XA |
0.000 |
| Item Length - XA |
0.000 |
| Item Width - XA |
0.000 |
| Master Case Height Inches - XA |
0.000 |
| Master Case Inner Pack Qty - XA |
0 |
| Master Case ITF14 |
0 |
| Master Case ITF14 - XA |
0 |
| Master Case Length Inches - XA |
0.000 |
| Master Case Qty - XA |
0 |
| Master Case Volume Cubic Feet - XA |
0.00000 |
| Master Case Weight Lbs - XA |
0.000 |
| Master Case Width Inches - XA |
0.000 |
| Material - XA |
Blank |
| Max Load |
180 LB |
| Mount Type Description - XA |
Blank |
| Number of Bikes |
4 |
| Pallet Case Per - XA |
0 |
| Pallet Case Per Layer - XA |
0 |
| Pallet Cases Per - XA |
0 |
| Pallet Cases Per Layer - XA |
0 |
| Pallet Layer of Cases - XA |
0 |
| Pallet Qty - XA |
0.000 |
| Pallet Total Height Inches - XA |
0.000 |
| Pallet Total Weight Per - XA |
0.000 |
| Parcel Allowed - XA |
Yes |
| Product Weight - XA |
0.000 |
| Description_MKT |
Your bicycle is more than just a frame, tires, handlebars and pedals. You live for what might be around that next turn, that burn in your legs as you climb a rocky trail and that freefall feeling you get as you descend a long hill. Your bike is not just a hobby; it is a gateway to the outdoors and your faithful companion in the wild. It was with this idea in mind that the CURT tray-style bike rack was built. The CURT hitch-mounted tray-style bike rack promotes your biking experience unlike any other because of its unique, three-point support system. It is made to be easier to use and keep bikes more secure, holding them at three points of contact. Instead of hanging the bike by its crossbar, the loop-like tray-style cradles hole the bike's wheels, keeping it secure on each end. The third point is an adjustable, ratcheting arm that moves up and down and locks over the crossbar, keeping the entire bike firmly held in place. Both the tray-style cradles and the vertical ratcheting arm are highly adjustable and can fit virtually any size bike, from a giant adult mountain bike to a single-gear kids' bike. CURT tray-style bike racks are not your average ten-speed. In fact, they are packed with features to truly make it all about the ride. They feature a hitch-mounted design to work with your vehicle's trailer hitch, and they come with a tilt-away feature to allow the entire rack to tilt away from the vehicle. This makes it easy to open a hatchback door or trunk and access the rear cargo area. Tray-style bike racks also feature a foldable, adjustable frame and an anti-wobble shank. This model fits 2" receiver tubes and holds two or four bikes with the extension. NOTE: For use with any frame-mounted 2" class 3 or higher trailer hitch receiver. Clamp-on bumper receivers and traditional 4" square bumpers should not be used to mount bike racks. Do not exceed receiver weight limits. |
| Description_FAB |
Tray-style cradles provide three points of contact to keep bikes fully secure |
| Description_FAB |
Ratcheting arms lock down onto the frames and will not loosen during travel |
| Description_FAB |
Key-operated ratchets also deter theft while the vehicle is left unattended |
| Description_FAB |
Highly adjustable cradles easily accommodate various bike sizes and styles |
| Description_FAB |
Padded arms protect the bike frames from nicks and scratches |
| Description_FAB |
Tray-style design allows for easy loading and unloading of bikes |
| Description_FAB |
Fits trailer hitches with 2" receiver tube openings |
| Description_FAB |
Securely holds up to four bikes with a max weight capacity of 180 lbs. |
| Description_FAB |
Threaded anti-wobble shank prevents bikes from swaying during travel |
| Description_FAB |
Tilts away for convenient rear vehicle access |
| Description_FAB |
Sides fold up when not in use for compact storage |
| Description_FAB |
Protected by a durable black powder coat finish |
| Description_FAB |
Limited lifetime warranty (one-year finish, one-year parts) |
| Description_TLE |
CURT 18087 Secure Locking Tray-Style Trailer Hitch Bike Rack Mount, Fits 2-Inch Receiver, 4 Bicycles |
| Description_ABR |
BIKEC |
| Description_SHO |
Tray-Style Bike Rack |
| Description_INV |
Tray-Style Hitch-Mounted Bike Rack |
| Description_ASC |
Tray-style cradles provide three points of contact to keep bikes fully secure |
| Description_ASC |
Ratcheting arms lock down onto the frames and will not loosen during travel |
| Description_ASC |
Key-operated ratchets also deter theft while the vehicle is left unattended |
| Description_ASC |
Highly adjustable cradles easily accommodate various bike sizes and styles |
| Description_ASC |
Padded arms protect the bike frames from nicks and scratches |
| Description_ASC |
Tray-style design allows for easy loading and unloading of bikes |
| Description_ASC |
Fits trailer hitches with 2" receiver tube openings |
| Description_ASC |
Securely holds up to four bikes with a max weight capacity of 180 lbs. |
| Description_ASC |
Threaded anti-wobble shank prevents bikes from swaying during travel |
| Description_ASC |
Tilts away for convenient rear vehicle access |
| Description_ASC |
Sides fold up when not in use for compact storage |
| Description_ASC |
Protected by a durable black powder coat finish |
| Description_ASC |
Limited lifetime warranty (one-year finish, one-year parts) |
| Description_DES |
Tray-Style Hitch-Mounted Bike Rack (4 Bikes, 2" Shank) |
| Description_EXT |
CURT 18087 Secure Locking Tray-Style Trailer Hitch Bike Rack Mount, Fits 2-Inch Receiver, 4 Bicycles |
| Description_DEF |
Bicycle Rack |
