Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455 - Side View
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455 - Back View
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455 - Installation View
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455 - Additional View 5
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455 - Additional View 6
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455 - Additional View 7
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455 - Additional View 8
Click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Technical Support

    We help with any installation questions

  • Wordwide Delivery

    Fast shipping times from USA warehouses

Edelbrock Cam and Lifters Kit fits 1976 Buick Electra 225 / 1975 Buick Electra Custom / 1975-1976 Buick Electra Limited / 1975-1976 Buick Estate Wagon

⚠️ Please verify fitment before purchasing. Check the fitment chart below or use the Year/Make/Model tool to confirm this part fits your vehicle.

⚠️ Verify fitment before purchasing. Check the fitment chart below or click the 3 lines in the top left menu, select Home, then use the Year/Make/Model guide.

Edelbrock
2152
In stock
$377.99 USD

NOT CARB LEGAL

$377.99 USD

Edelbrock Cam and Lifters Kit fits 1976 Buick Electra 225 / 1975 Buick Electra Custom / 1975-1976 Buick Electra Limited / 1975-1976 Buick Estate Wagon

Edelbrock Performer-Plus Camshaft #2152 is designed for 400-425-455 Oldsmobile V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2152 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 445 Ft Lbs of Torque when paired with Performer Olds 455 intake manifold #2151 and stock cylinder heads. Will not fit Toronados or 1966 and earlier. Fits 1967-84 400-425-455, 39 Degree bank angle engine. Camshaft specifications: - Intake duration: 214 Degrees - Exhaust duration: 224 Degrees - Intake lift: .472" - Exhaust lift: .496" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 15"

Installation Instructions
Warranty
Installation Instructions

This Part Fits:

Year Make Model Submodel
1976 Buick Electra 225
1975 Buick Electra Custom
1975-1976 Buick Electra Limited
1975-1976 Buick Estate Wagon Base
1975 Buick LeSabre Base
1975-1976 Buick LeSabre Custom
1975-1976 Buick Riviera Base
1975 Buick Riviera GS
1976 Buick Riviera Sport
1976 Buick Riviera SR
1973-1974 GMC Transmode Base
1967-1971 Oldsmobile 442 Base
1967-1974 Oldsmobile 98 Base
1967 Oldsmobile 98 Holiday
1975-1976 Oldsmobile 98 Luxury
1973-1976 Oldsmobile 98 Regency
1971-1976 Oldsmobile Custom Cruiser Base
1975-1976 Oldsmobile Custom Cruiser Panel
1975 Oldsmobile Cutlass 442
1967-1968,1970-1975 Oldsmobile Cutlass Base
1976 Oldsmobile Cutlass Colonnade S
1972 Oldsmobile Cutlass Cruiser
1967 Oldsmobile Cutlass Holiday
1971-1976 Oldsmobile Cutlass S
1967 Oldsmobile Cutlass Turnpike Cruiser
1976 Oldsmobile Cutlass Vista Cruiser
1975-1976 Oldsmobile Cutlass Salon Base
1971-1976 Oldsmobile Cutlass Supreme Base
1976 Oldsmobile Cutlass Supreme Colonnade
1974-1975 Oldsmobile Cutlass Supreme Cruiser
1976 Oldsmobile Cutlass Tiara Base
1967-1968 Oldsmobile Delmont 88 Base
1967 Oldsmobile Delmont 88 Holiday
1967-1976 Oldsmobile Delta 88 Base
1967-1971 Oldsmobile Delta 88 Custom
1967 Oldsmobile Delta 88 Holiday
1969-1976 Oldsmobile Delta 88 Royale
1970,1972 Oldsmobile F85 Base
1968-1975 Oldsmobile Vista Cruiser Base
Read More
Read Less

Your cart

×