This mandrel-bent headers-back exhaust system is custom designed for most 1967-1969 Chevrolet Camaro and Pontiac Firebird, and is perfect for the person looking for true dual exhaust system. This system comes complete minus the mufflers and allows you to choose the sound level of the Flowmaster performance mufflers you desire for your vehicle. System features include all mandrel-bent 3.00-inch aluminized steel tubing, an H-pipe to equalize the exhaust gas pressures and sound for maximum performance and maximum clearance. Designed for an easy fit, these systems covered by our 3-year Limited Warranty. Notes: Requires 3.00-inch Offset Inlet/Opposite side Offset Outlet such as part# 943048 (Super 44 Series) mufflers.
| Brand |
Flowmaster |
| Description_ABR |
SYS 67-69 CA |
| California Proposition 65 |
No |
| Description_SHO |
SYS 67-69 CAM/FBRD 3 |
| CARB (California) Compliant |
Yes |
| Description_INV |
67-69 CAM/FBRD 3.0 UNIV. PIPE KIT |
| Catalytic Converter Included |
No |
| Description_ASC |
Use Offset Inlet/Center Outlet Mufflers Only.Fabrication required for installation of H-pipe.Does Not Include Header Collector Adapter Cones or hardware. |
| 2874 |
0 |
| Description_DES |
Flowmaster Crossmember-Back Exhaust System |
| Category |
Exhaust |
| Description_EXT |
Fits 1967-1969 Camaro and Firebird with V8 engine. 3.00-inch Aluminized pipes. |
| Clamping Type |
U-Bolt |
| Description_MKT |
This mandrel-bent headers-back exhaust system is custom designed for most 1967-1969 Chevrolet Camaro and Pontiac Firebird, and is perfect for the person looking for true dual exhaust system. This system comes complete minus the mufflers and allows you to choose the sound level of the Flowmaster performance mufflers you desire for your vehicle. System features include all mandrel-bent 3.00-inch aluminized steel tubing, an H-pipe to equalize the exhaust gas pressures and sound for maximum performance and maximum clearance. Designed for an easy fit, these systems covered by our 3-year Limited Warranty. Notes: Requires 3.00-inch Offset Inlet/Opposite side Offset Outlet such as part# 943048 (Super 44 Series) mufflers. |
| 1882 |
No |
| Description_FAB |
Designed for Side Inlet/Center Outlet Mufflers |
| Emission Code |
3 |
| Description_FAB |
Mandrel-bent for Maximum Performance |
| 1162 |
3.00 |
| Description_FAB |
High Clearance around Rear Differential |
| 1161 |
0 |
| Description_FAB |
16 Gauge Aluminzed Steel Tubing |
| Exhaust Tip Quantity |
Sold Separately |
| Description_FAB |
Does Not Include Hardware |
| 9878 |
No |
| Description_FAB |
Mufflers Sold Separately |
| 10980 |
Round |
| Description_FAB |
3-year Limited Warranty |
| 9870 |
Dual Out Side |
| Description_ABR |
SYS 67-69 CA |
| 200 |
Aluminized |
| Description_SHO |
SYS 67-69 CAM/FBRD 3 |
| 353 |
No |
| Description_INV |
67-69 CAM/FBRD 3.0 UNIV. PIPE KIT |
| 3390 |
Performance |
| Description_ASC |
Use Offset Inlet/Center Outlet Mufflers Only.Fabrication required for installation of H-pipe.Does Not Include Header Collector Adapter Cones or hardware. |
| 4364 |
No |
| Description_DES |
Flowmaster Crossmember-Back Exhaust System |
| 596 |
Clamp-On |
| Description_EXT |
Fits 1967-1969 Camaro and Firebird with V8 engine. 3.00-inch Aluminized pipes. |
| 9871 |
3.00 |
| Description_MKT |
This mandrel-bent headers-back exhaust system is custom designed for most 1967-1969 Chevrolet Camaro and Pontiac Firebird, and is perfect for the person looking for true dual exhaust system. This system comes complete minus the mufflers and allows you to choose the sound level of the Flowmaster performance mufflers you desire for your vehicle. System features include all mandrel-bent 3.00-inch aluminized steel tubing, an H-pipe to equalize the exhaust gas pressures and sound for maximum performance and maximum clearance. Designed for an easy fit, these systems covered by our 3-year Limited Warranty. Notes: Requires 3.00-inch Offset Inlet/Opposite side Offset Outlet such as part# 943048 (Super 44 Series) mufflers. |
| 92 |
No |
| Description_FAB |
Designed for Side Inlet/Center Outlet Mufflers |
| Muffler Included |
No |
| Description_FAB |
Mandrel-bent for Maximum Performance |
| 4374 |
0 |
| Description_FAB |
High Clearance around Rear Differential |
| Muffler Quantity |
Sold Separately |
| Description_FAB |
16 Gauge Aluminzed Steel Tubing |
| 1174 |
Not Included |
| Description_FAB |
Does Not Include Hardware |
| part type |
Exhaust System |
| Description_FAB |
Mufflers Sold Separately |
| 3530 |
Aluminized Steel |
| Description_FAB |
3-year Limited Warranty |
| Product Type |
Exhaust Accessories |
| 4377 |
No |
| Sub Category |
Exhaust and Tail Pipes |
| 4369 |
3.00 |
| 4376 |
2 |
| Tail Pipe Quantity |
Dual |
| 4370 |
No |
| Type |
Crossmember-back |
| Type |
Header-Back |
| Type |
Pipe Kit |
| 6014 |
No |
| 2126 |
Not Applicable |
| Pipe Color |
Silver |
| Brand |
Flowmaster |
| California Proposition 65 |
No |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| 2874 |
0 |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| 1882 |
No |
| Emission Code |
3 |
| 1162 |
3.00 |
| 1161 |
0 |
| Exhaust Tip Quantity |
Sold Separately |
| 9878 |
No |
| 10980 |
Round |
| 9870 |
Dual Out Side |
| 200 |
Aluminized |
| 353 |
No |
| 3390 |
Performance |
| 4364 |
No |
| 596 |
Clamp-On |
| 9871 |
3.00 |
| 92 |
No |
| Muffler Included |
No |
| 4374 |
0 |
| Muffler Quantity |
Sold Separately |
| 1174 |
Not Included |
| part type |
Exhaust System |
| 3530 |
Aluminized Steel |
| Product Type |
Exhaust Accessories |
| 4377 |
No |
| Sub Category |
Exhaust and Tail Pipes |
| 4369 |
3.00 |
| 4376 |
2 |
| Tail Pipe Quantity |
Dual |
| 4370 |
No |
| Type |
Crossmember-back |
| Type |
Header-Back |
| Type |
Pipe Kit |
| 6014 |
No |
| 2126 |
Not Applicable |
| Pipe Color |
Silver |
