The Delta Force "U-fit" air intake kit from Flowmaster is perfect for the person doing an engine swap in a "classic car" or race vehicle, or converting from a carb to EFI, and needs a solution for fabricating a custom air intake. This universal system comes complete with a custom molded Cross-Linked Polyethylene (XLPE) high-flow 4.00-inch intake tube with numerous pre-set cut guides and various bend angles for versatility and adaptation under the hood. Also includes a large diameter high-flow 8-layer cotton gauze air filter, which traps more dirt than typical 6-layer designs and comes pre-oiled and ready to run. The filter is reusable and should provide a lifetime of service when maintained properly with our Delta Force Refresh kit #615001. Other features include a blade style MAF sensor adapter, various sizes of high quality reinforced silicone couplers, stainless steel clamps, universal brackets and hardware to help fabricate a complete air intake system. Note: Some tuning may be required. This intake system is intended for use on pre-emissions vehicles, or non-street legal competition race vehicles only. Fabrication required.
| Air Box Included |
No |
| 10468 |
Open |
| Air Filter Element Color |
Red |
| Air Filter Element Material |
Cotton Gauze |
| Air Filter Element Washable |
Yes |
| Air Filter End Cap Color/Finish |
Black |
| Air Filter Heat Shield Included |
No |
| Air Filter Inside Diameter |
6.00 |
| Air Filter Oil Included |
Pre-Oiled |
| Air Filter Outlet Shape |
Circular |
| Air Filter Outside Diameter |
7.50 |
| Air Filter Overall Height |
7.50 |
| Air Filter Overall Width |
7.50 |
| Brand |
Flowmaster |
| California Proposition 65 Chemical Name |
Benzene |
| California Proposition 65 Chemical Name |
Ethylbenzene |
| California Proposition 65 Chemical Name |
Nickel (Metallic) |
| California Proposition 65 Chemical Name |
Chromium (hexavalent compounds) |
| California Proposition 65 Chemical Name |
Lead |
| California Proposition 65 Required |
Yes |
| CARB (California) Compliant |
No |
| Category |
Air and Fuel Delivery |
| 3429 |
Silver |
| Clamp Color/Finish |
Natural |
| Clamp Material |
Stainless Steel |
| 3606 |
12 |
| Clamp Quantity Included |
12 |
| 5745 |
Black |
| 5746 |
Silicone |
| 10470 |
9 |
| Coupler Quantity Included |
9 |
| 10538 |
No |
| Emission Code |
4 |
| 3801 |
Red |
| 525 |
Cotton Gauze |
| 4699 |
Cone |
| Fitment |
Universal |
| Fuel Type |
Universal |
| 3390 |
Performance |
| Heat Shield Color |
Not Applicable |
| 8611 |
No |
| Heat Shield Sheen Level |
Not Applicable |
| 1369 |
Black |
| 761 |
Not Applicable |
| Intake Pipe Inlet Width |
4.00 |
| Intake Pipe Material |
Polyethelene |
| Intake Pipe Outlet Width |
4.00 |
| MAF Sensor Adapter Included |
Yes |
| 10469 |
Yes |
| 30 |
Yes |
| part type |
Engine Cold Air Intake |
| Product Type |
Performance Air Intakes |
| Replacement Filter PN (Oiled) |
615011 |
| Special Fitment Info |
Universal |
| Sub Category |
Fuel Injection System and Related Components |
| 4255 |
Black |
| 368 |
PE (Polyethylene) |
| 10465 |
Flat |
| 10466 |
Smooth |
| Warning |
California Proposition 65 |
| Air Box Included |
No |
| 10468 |
Open |
| Air Filter Element Color |
Red |
| Air Filter Element Material |
Cotton Gauze |
| Air Filter Element Washable |
Yes |
| Air Filter End Cap Color/Finish |
Black |
| Air Filter Heat Shield Included |
No |
| Air Filter Inside Diameter |
6.00 |
| Air Filter Oil Included |
Pre-Oiled |
| Air Filter Outlet Shape |
Circular |
| Air Filter Outside Diameter |
7.50 |
| Air Filter Overall Height |
7.50 |
| Air Filter Overall Width |
7.50 |
| Brand |
Flowmaster |
| California Proposition 65 Chemical Name |
Benzene |
| California Proposition 65 Chemical Name |
Ethylbenzene |
| California Proposition 65 Chemical Name |
Nickel (Metallic) |
| California Proposition 65 Chemical Name |
Chromium (hexavalent compounds) |
| California Proposition 65 Chemical Name |
Lead |
| California Proposition 65 Required |
Yes |
| CARB (California) Compliant |
No |
| Category |
Air and Fuel Delivery |
| 3429 |
Silver |
| Clamp Color/Finish |
Natural |
| Clamp Material |
Stainless Steel |
| 3606 |
12 |
| Clamp Quantity Included |
12 |
| 5745 |
Black |
| 5746 |
Silicone |
| 10470 |
9 |
| Coupler Quantity Included |
9 |
| 10538 |
No |
| Emission Code |
4 |
| 3801 |
Red |
| 525 |
Cotton Gauze |
| 4699 |
Cone |
| Fitment |
Universal |
| Fuel Type |
Universal |
| 3390 |
Performance |
| Heat Shield Color |
Not Applicable |
| 8611 |
No |
| Heat Shield Sheen Level |
Not Applicable |
| 1369 |
Black |
| 761 |
Not Applicable |
| Intake Pipe Inlet Width |
4.00 |
| Intake Pipe Material |
Polyethelene |
| Intake Pipe Outlet Width |
4.00 |
| MAF Sensor Adapter Included |
Yes |
| 10469 |
Yes |
| 30 |
Yes |
| part type |
Engine Cold Air Intake |
| Product Type |
Performance Air Intakes |
| Replacement Filter PN (Oiled) |
615011 |
| Special Fitment Info |
Universal |
| Sub Category |
Fuel Injection System and Related Components |
| 4255 |
Black |
| 368 |
PE (Polyethylene) |
| 10465 |
Flat |
| 10466 |
Smooth |
| Warning |
California Proposition 65 |
| Description_ABR |
AIRFLT UNIV |
| Description_SHO |
AIRFLT UNIV AIR INTA |
| Description_INV |
UNIVERSAL AIR INTAKE KIT, 4.00 |
| Description_ASC |
Not a Direct Fit |
| Description_DES |
Flowmaster Delta Force Performance Air Intake |
| Description_EXT |
Universal 4.00-inch Air Intake System |
| Description_MKT |
The Delta Force "U-fit" air intake kit from Flowmaster is perfect for the person doing an engine swap in a "classic car" or race vehicle, or converting from a carb to EFI, and needs a solution for fabricating a custom air intake. This universal system comes complete with a custom molded Cross-Linked Polyethylene (XLPE) high-flow 4.00-inch intake tube with numerous pre-set cut guides and various bend angles for versatility and adaptation under the hood. Also includes a large diameter high-flow 8-layer cotton gauze air filter, which traps more dirt than typical 6-layer designs and comes pre-oiled and ready to run. The filter is reusable and should provide a lifetime of service when maintained properly with our Delta Force Refresh kit #615001. Other features include a blade style MAF sensor adapter, various sizes of high quality reinforced silicone couplers, stainless steel clamps, universal brackets and hardware to help fabricate a complete air intake system. Note: Some tuning may be required. This intake system is intended for use on pre-emissions vehicles, or non-street legal competition race vehicles only. Fabrication required. |
| Description_FAB |
Serviceable Lifetime High-Flow 8 Layer Cotton Gauze Filter |
| Description_FAB |
Adjustable Mounting Brackets and Hardware |
| Description_FAB |
Universal Performance Air Intake System |
| Description_FAB |
Includes Reinforced Silicone Couplers |
| Description_FAB |
Includes Blade Style MAF Adapter |
| Description_FAB |
Contains Various Bend Angles |
| Description_FAB |
Numerous Pre-set Cut Guides |
| Description_FAB |
High Quality Components |
| Description_FAB |
Stainless Steel Clamps |
| Description_FAB |
Flowmaster Quality |
| Description_ABR |
AIRFLT UNIV |
| Description_SHO |
AIRFLT UNIV AIR INTA |
| Description_INV |
UNIVERSAL AIR INTAKE KIT, 4.00 |
| Description_ASC |
Not a Direct Fit |
| Description_DES |
Flowmaster Delta Force Performance Air Intake |
| Description_EXT |
Universal 4.00-inch Air Intake System |
| Description_MKT |
The Delta Force "U-fit" air intake kit from Flowmaster is perfect for the person doing an engine swap in a "classic car" or race vehicle, or converting from a carb to EFI, and needs a solution for fabricating a custom air intake. This universal system comes complete with a custom molded Cross-Linked Polyethylene (XLPE) high-flow 4.00-inch intake tube with numerous pre-set cut guides and various bend angles for versatility and adaptation under the hood. Also includes a large diameter high-flow 8-layer cotton gauze air filter, which traps more dirt than typical 6-layer designs and comes pre-oiled and ready to run. The filter is reusable and should provide a lifetime of service when maintained properly with our Delta Force Refresh kit #615001. Other features include a blade style MAF sensor adapter, various sizes of high quality reinforced silicone couplers, stainless steel clamps, universal brackets and hardware to help fabricate a complete air intake system. Note: Some tuning may be required. This intake system is intended for use on pre-emissions vehicles, or non-street legal competition race vehicles only. Fabrication required. |
| Description_FAB |
Serviceable Lifetime High-Flow 8 Layer Cotton Gauze Filter |
| Description_FAB |
Adjustable Mounting Brackets and Hardware |
| Description_FAB |
Universal Performance Air Intake System |
| Description_FAB |
Includes Reinforced Silicone Couplers |
| Description_FAB |
Includes Blade Style MAF Adapter |
| Description_FAB |
Contains Various Bend Angles |
| Description_FAB |
Numerous Pre-set Cut Guides |
| Description_FAB |
High Quality Components |
| Description_FAB |
Stainless Steel Clamps |
| Description_FAB |
Flowmaster Quality |
