Holley EFI Plug and Play CANbus Exhaust Gas Temperature Kit, for Holley EFI. 554-186

Introducing the Holley EFI 8 Channel CANBus EGT Kit. Exhaust Gas Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to quickly identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The probes come in 4 different lengths ensuring a clean looking installation. The included 316 stainless steel bungs feature a built in step, making bung installation as easy as possible. Everything needed to upgrade your exhaust system is included, such as 1/4" 316 Stainless Steel EGT Bungs, 8 EGT Sensors, and the 8 Channel CANbus EGT controller!

Specifications:

Brand	Holley EFI
Category	Emission Control
2170	Black
Emission Code	5
3390	Performance
10	ABS Composite
90	Bolt On
part type	Exhaust Gas Temperature (EGT) Sensor
Product Type	Exhaust Gas Temperature Kit (EGT)
Sub Category	Sensors
Warning	California Proposition 65
Description_INV	EGT, 8-CHANNEL KIT
Description_ASC	HP or Dominator ECU requires V5 Build 100 or newer software/ firmware. Terminator X ECU requires software version 1.0 Build 102 or newer
Description_DES	Holley EFI 8 Channel CAN EGT Kit
Description_EXT	Plug and Play CANbus Exhaust Gas Temperature Kit, for Holley EFI.
Description_MKT	Introducing the Holley EFI 8 Channel CANBus EGT Kit. Exhaust Gas Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to quickly identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The probes come in 4 different lengths ensuring a clean looking installation. The included 316 stainless steel bungs feature a built in step, making bung installation as easy as possible. Everything needed to upgrade your exhaust system is included, such as 1/4" 316 Stainless Steel EGT Bungs, 8 EGT Sensors, and the 8 Channel CANbus EGT controller!
Description_FAB	Compatible with HP or Dominator EFI, and Terminator X EFI.
Description_FAB	Plug and Play 8 Channel CAN EGT Module, for a quick and easy installation
Description_FAB	High Quality ¼” Stepped Stainless Steel EGT Weld Bungs
Description_FAB	8x- Robust ¼” EGT Probes, designed to withstand the extreme cylinder pressures
Description_FAB	4’ CAN Extension Harness
Description_FAB	8x Analog output wires, to be used with non-Holley EFI installations