Its dual plane design makes it perfect for low end torque, yet it still pulls all the way to 6,500 RPM! Our O-ring cylinder head mounting flange gaskets provide an OEM style seal and make installation a snap. Bolt one on today!
| Basic Operating RPM Range |
1500-6500 |
| Brand |
Holley |
| 10653 |
Square/4150 |
| 10650 |
1 |
| Carburetor Studs Included |
4150 Square Bore |
| Category |
Engine |
| 9063 |
No |
| 17 |
Black |
| 158 |
Cast |
| 5337 |
Rectangle |
| 6621 |
9.24 |
| 8095 |
No |
| Emission Code |
4 |
| Engine |
GM LS3/L92 |
| Flange Style |
4150 Square Bore |
| 6643 |
5.07 |
| 906 |
No |
| 10644 |
No |
| Fuel System Type |
Carb |
| 353 |
No |
| 3390 |
Performance |
| 10651 |
No |
| Manifold Type |
Dual Plane |
| 10 |
Aluminum |
| 10648 |
No |
| part type |
Engine Intake Manifold |
| Plenum Finish |
Black |
| Product Type |
Intake Manifold |
| 6645 |
6.14 |
| 10645 |
No |
| 10649 |
No |
| 6642 |
Single Plane |
| Sub Category |
Cylinder Block Components |
| Throttle Body Bore Diameter |
3.6 |
| Throttle Body Gasket Included |
No |
| 10626 |
No |
| Vacuum Ports |
Yes |
| Warning |
California Proposition 65 |
| Warranty |
Manufacturer's Limited 90 Day Warranty |
| Description_ABR |
INTAKE MANIF |
| Description_SHO |
HOLLEY DUAL PLANE |
| Description_INV |
INTAKE MANIFOLD, LS3 DUAL PLANE - BLACK |
| Description_ASC |
Fits all GM LS Gen III or IV engines equipped with LS3/LS92 style rectangular port cylinder heads. Includes mounting bolts & washers.NOTE: These Dual-Plane Intake Manifolds are NOT legal for sale or use on engines with pollution controlled equipment. |
| Description_DES |
Holley Dual Plane Carbureted Intake - GM LS3/L92 - Black |
| Description_EXT |
All GM LS Gen III or IV engines equipped with LS3/LS92 style rectangular port cylinder heads- Black Finish |
| Description_MKT |
Got an LS engine to get running? Nothing is easier than bolting on a carburetor. Holley's dual plane carbureted intake for GM's LS engines will help you get on the streets quick! |
| Description_MKT |
Its dual plane design makes it perfect for low end torque, yet it still pulls all the way to 6,500 RPM! Our O-ring cylinder head mounting flange gaskets provide an OEM style seal and make installation a snap. Bolt one on today! |
| Description_FAB |
Minimum carb flange height means it fits in vehicles with minimal or no hood modifications |
| Description_FAB |
Includes Viton® O-rings - Viton® is a registered trademark of DuPont Performance Elastomers |
| Description_FAB |
1500-6500 RPM power band |
| Description_FAB |
Optimized runner layout and constant cross sectional area provide a broad torque curve |
| Description_FAB |
Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality |
| Description_FAB |
Weighs 14.56 lbs. |
| Description_FAB |
Height (rear) - 6.14" from rear lifter valley cover to carb mounting flange |
| Description_FAB |
Height (front) - 5.07" from front lifter valley cover to carb mounting flange |
| Description_FAB |
Mounting flange gasket type - O-ring |
| Description_FAB |
Great for carbureted or throttle body EFI street applications |
| Description_FAB |
Port size - 2.454" height x 1.09" wide |
| Description_FAB |
4150 square bore carb mounting flange |
| Description_ABR |
INTAKE MANIF |
| Description_SHO |
HOLLEY DUAL PLANE |
| Description_INV |
INTAKE MANIFOLD, LS3 DUAL PLANE - BLACK |
| Description_ASC |
Fits all GM LS Gen III or IV engines equipped with LS3/LS92 style rectangular port cylinder heads. Includes mounting bolts & washers.NOTE: These Dual-Plane Intake Manifolds are NOT legal for sale or use on engines with pollution controlled equipment. |
| Description_DES |
Holley Dual Plane Carbureted Intake - GM LS3/L92 - Black |
| Description_EXT |
All GM LS Gen III or IV engines equipped with LS3/LS92 style rectangular port cylinder heads- Black Finish |
| Description_MKT |
Got an LS engine to get running? Nothing is easier than bolting on a carburetor. Holley's dual plane carbureted intake for GM's LS engines will help you get on the streets quick! |
| Description_MKT |
Its dual plane design makes it perfect for low end torque, yet it still pulls all the way to 6,500 RPM! Our O-ring cylinder head mounting flange gaskets provide an OEM style seal and make installation a snap. Bolt one on today! |
| Description_FAB |
Minimum carb flange height means it fits in vehicles with minimal or no hood modifications |
| Description_FAB |
Includes Viton® O-rings - Viton® is a registered trademark of DuPont Performance Elastomers |
| Description_FAB |
1500-6500 RPM power band |
| Description_FAB |
Optimized runner layout and constant cross sectional area provide a broad torque curve |
| Description_FAB |
Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality |
| Description_FAB |
Weighs 14.56 lbs. |
| Description_FAB |
Height (rear) - 6.14" from rear lifter valley cover to carb mounting flange |
| Description_FAB |
Height (front) - 5.07" from front lifter valley cover to carb mounting flange |
| Description_FAB |
Mounting flange gasket type - O-ring |
| Description_FAB |
Great for carbureted or throttle body EFI street applications |
| Description_FAB |
Port size - 2.454" height x 1.09" wide |
| Description_FAB |
4150 square bore carb mounting flange |
| Basic Operating RPM Range |
1500-6500 |
| Brand |
Holley |
| 10653 |
Square/4150 |
| 10650 |
1 |
| Carburetor Studs Included |
4150 Square Bore |
| Category |
Engine |
| 9063 |
No |
| 17 |
Black |
| 158 |
Cast |
| 5337 |
Rectangle |
| 6621 |
9.24 |
| 8095 |
No |
| Emission Code |
4 |
| Engine |
GM LS3/L92 |
| Flange Style |
4150 Square Bore |
| 6643 |
5.07 |
| 906 |
No |
| 10644 |
No |
| Fuel System Type |
Carb |
| 353 |
No |
| 3390 |
Performance |
| 10651 |
No |
| Manifold Type |
Dual Plane |
| 10 |
Aluminum |
| 10648 |
No |
| part type |
Engine Intake Manifold |
| Plenum Finish |
Black |
| Product Type |
Intake Manifold |
| 6645 |
6.14 |
| 10645 |
No |
| 10649 |
No |
| 6642 |
Single Plane |
| Sub Category |
Cylinder Block Components |
| Throttle Body Bore Diameter |
3.6 |
| Throttle Body Gasket Included |
No |
| 10626 |
No |
| Vacuum Ports |
Yes |
| Warning |
California Proposition 65 |
| Warranty |
Manufacturer's Limited 90 Day Warranty |
