-6%
Sold out
-
Guaranteed Fitment
Always the correct part
-
In-House Experts
We know our products
-
Technical Support
We help with any installation questions
-
Wordwide Delivery
Fast shipping times
Holley Holley High Pressure Spring - Godzilla 7.3L Engine 302-102
$22.44
$20.99
For certain applications, higher than normal oil pressure is required. Typically, the oil pan must be removed to change the pressure spring on an oil pump. The Holley oil system allows direct access to the spring through the access port on the bottom front of the pan. Holley high-pressure spring P/N 302-102 can be purchased and installed to increase oil pressure by approximately 10 PSI at higher RPMs. To change the spring, remove the port plug, spring, and plunger. In some cases, the plunger may stay in the port. Make sure when reassembling the plunger is on top of the spring and oriented correctly.
Specifications:
| Brand | Holley |
| Category | Engine |
| 2256 | 9 |
| Emission Code | 5 |
| Engine | Ford 7.3L Godzilla |
| 3390 | Performance |
| 10 | Steel |
| part type | Engine Oil Pressure Relief Valve Spring |
| Product Type | Oil Pressure Spring |
| 8154 | Push |
| Sub Category | Hardware, Fasteners and Fittings |
| Warning | California Proposition 65 |
| Warranty | Manufacturer's Limited 90 Day Warranty |
| Description_INV | PUMP SPRING-HIGH OIL PRESSURE, 7.3L FORD |
| Description_ASC | Torque plug to 30 ft./lbs. (use blue thread locker). |
| Description_DES | Holley High Pressure Spring - Godzilla 7.3L Engine |
| Description_EXT | Fits 2020 & Up Ford 7.3L Gasoline V8 Godzilla Engines with Holley Oil Pump and Pan |
| Description_MKT | For certain applications, higher than normal oil pressure is required. Typically, the oil pan must be removed to change the pressure spring on an oil pump. The Holley oil system allows direct access to the spring through the access port on the bottom front of the pan. Holley high-pressure spring P/N 302-102 can be purchased and installed to increase oil pressure by approximately 10 PSI at higher RPMs. To change the spring, remove the port plug, spring, and plunger. In some cases, the plunger may stay in the port. Make sure when reassembling the plunger is on top of the spring and oriented correctly. |
| Description_FAB | Increases oil pressure by approximately 10psi at higher RPM |