For a better seal use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws.
| Application |
1982-1987 Chevrolet / GMC C10 Series Truck |
| Brand |
Holley Sniper EFI |
| Category |
Air and Fuel Delivery |
| Choose Your Part |
Fuel Tank |
| Color |
Silver |
| Drain Plug |
No |
| Emission Code |
4 |
| 4297 |
No |
| Finish |
Powdercoated |
| Free Flow LPH |
400 |
| Fuel Sending Unit Ohms |
0-90 Ohms |
| Fuel System Type |
Gasoline |
| Gallon Capacity |
16 |
| Material |
Steel |
| New Straps Included |
Yes |
| part type |
Fuel Tank and Pump Assembly Combination |
| Product Type |
Fuel Tank |
| 4296 |
Yes |
| Sub Category |
Fuel Pumps and Related Components |
| Truck Bed Length |
Short Bed |
| Warning |
California Proposition 65 |
| Warranty |
Manufacturer's Limited 90 Day Warranty |
| Description_INV |
1982-87 CHEVY/GMC TRUCK 6FT 400 LPH |
| Description_ASC |
When installing sending units, please remember to rotate the unit until the mounting holes align with the flange holes in the tank. |
| Description_DES |
Sniper EFI Fuel Tank System 400 LPH |
| Description_EXT |
1982-1987 Chevy/GMC Truck 6FT Bed, Coated Steel, EFI, Gas |
| Description_MKT |
Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 400 lph fuel pump, internal baffling, and a fuel level sender. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! |
| Description_MKT |
Supports up to 750 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) |
| Description_MKT |
•Size is: •42-7/8" x 14-1/8" x 11" |
| Description_MKT |
***New Straps included |
| Description_MKT |
***Using the GM design, these tanks will fit on either side of the truck. |
| Description_MKT |
For a better seal use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws. |
| Description_FAB |
Tanks are coated galvanized steel then powder coated silver for total corrosion protection |
| Description_FAB |
400 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness |
| Description_FAB |
Sender has ¼” NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting |
| Description_FAB |
Fuel level sender included with the correct Ohm range for your factory gauges |
| Description_FAB |
Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car |
| Description_FAB |
EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation |
| Description_FAB |
Fits and looks like an OE tank when installed |
| Description_FAB |
Complete bolt in solution for your EFI conversion |
| Description_FAB |
Includes new tank straps |
| Description_INV |
1982-87 CHEVY/GMC TRUCK 6FT 400 LPH |
| Description_ASC |
When installing sending units, please remember to rotate the unit until the mounting holes align with the flange holes in the tank. |
| Description_DES |
Sniper EFI Fuel Tank System 400 LPH |
| Description_EXT |
1982-1987 Chevy/GMC Truck 6FT Bed, Coated Steel, EFI, Gas |
| Description_MKT |
Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 400 lph fuel pump, internal baffling, and a fuel level sender. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! |
| Description_MKT |
Supports up to 750 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) |
| Description_MKT |
•Size is: •42-7/8" x 14-1/8" x 11" |
| Description_MKT |
***New Straps included |
| Description_MKT |
***Using the GM design, these tanks will fit on either side of the truck. |
| Description_MKT |
For a better seal use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws. |
| Description_FAB |
Tanks are coated galvanized steel then powder coated silver for total corrosion protection |
| Description_FAB |
400 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness |
| Description_FAB |
Sender has ¼” NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting |
| Description_FAB |
Fuel level sender included with the correct Ohm range for your factory gauges |
| Description_FAB |
Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car |
| Description_FAB |
EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation |
| Description_FAB |
Fits and looks like an OE tank when installed |
| Description_FAB |
Complete bolt in solution for your EFI conversion |
| Description_FAB |
Includes new tank straps |
| Application |
1982-1987 Chevrolet / GMC C10 Series Truck |
| Brand |
Holley Sniper EFI |
| Category |
Air and Fuel Delivery |
| Choose Your Part |
Fuel Tank |
| Color |
Silver |
| Drain Plug |
No |
| Emission Code |
4 |
| 4297 |
No |
| Finish |
Powdercoated |
| Free Flow LPH |
400 |
| Fuel Sending Unit Ohms |
0-90 Ohms |
| Fuel System Type |
Gasoline |
| Gallon Capacity |
16 |
| Material |
Steel |
| New Straps Included |
Yes |
| part type |
Fuel Tank and Pump Assembly Combination |
| Product Type |
Fuel Tank |
| 4296 |
Yes |
| Sub Category |
Fuel Pumps and Related Components |
| Truck Bed Length |
Short Bed |
| Warning |
California Proposition 65 |
| Warranty |
Manufacturer's Limited 90 Day Warranty |
