400 LPH Electric Fuel Pump Assembly for Sniper EFI Fuel Tanks. Oven brazed fittings can withstand 100 psi. Genuine Walbro Fuel Pump included. 1/4" NPT Supply and Return line. For a better seal, use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws.
| Brand |
Holley Sniper EFI |
| Category |
Air and Fuel Delivery |
| Color |
Gold |
| Connector Quantity |
N/A |
| Emission Code |
5 |
| Finish |
Gold Iridited |
| 1153 |
No |
| 9103 |
No |
| Fuel Type |
Gasoline |
| 353 |
No |
| Material |
Steel |
| part type |
Fuel Pump Module Assembly |
| Product Type |
Fuel Pump |
| 235 |
No |
| 518 |
Yes |
| Sub Category |
Fuel Pumps and Related Components |
| Terminal Quantity |
N/A |
| 3145 |
Universal |
| Warning |
California Proposition 65 |
| Warranty |
Manufacturer's Limited 90 Day Warranty |
| Brand |
Holley Sniper EFI |
| Category |
Air and Fuel Delivery |
| Color |
Gold |
| Connector Quantity |
N/A |
| Emission Code |
5 |
| Finish |
Gold Iridited |
| 1153 |
No |
| 9103 |
No |
| Fuel Type |
Gasoline |
| 353 |
No |
| Material |
Steel |
| part type |
Fuel Pump Module Assembly |
| Product Type |
Fuel Pump |
| 235 |
No |
| 518 |
Yes |
| Sub Category |
Fuel Pumps and Related Components |
| Terminal Quantity |
N/A |
| 3145 |
Universal |
| Warning |
California Proposition 65 |
| Warranty |
Manufacturer's Limited 90 Day Warranty |
| Description_INV |
400 LPH FUEL PUMP AND HANGER ASSEMBLY |
| Description_ASC |
New Mounting Screws and gasket available separately. *19-170 kit is a thicker gasket and longer screws for use on the GM A Body (Chevelle, GTO, etc....) fuel tanks since they are shallower at the point where the fuel pump is mounted. *19-169 kit for all other EFI fuel tanksConnect your in-tank wire harness to the fuel pump, making sure that the connections are secure. Route the wires through the pass through fitting being sure to leave a little slack to prevent strain or chaffing, Use a 9mm wrench to tighten the upper jam nut on the wire pass through in 1/4 turn increments until the wire no longer moves up and down. BE CAREFULL NOT TO OVERTIGHTEN DOING SO COULD BREAK THE FITTING OR CAUSE A LEAK. |
| Description_DES |
Fuel Pump Assembly - 400 LPH |
| Description_EXT |
Replacement 400 LPH FUEL PUMP AND HANGER ASSEMBLY |
| Description_MKT |
400 LPH Electric Fuel Pump Assembly for Sniper EFI Fuel Tanks. Oven brazed fittings can withstand 100 psi. Genuine Walbro Fuel Pump included. 1/4" NPT Supply and Return line. For a better seal, use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws. |
| Description_FAB |
1/4" NPT Supply and Return Line |
| Description_FAB |
In-Tank Wire Harness |
| Description_FAB |
Made in USA |
| Description_FAB |
Heavy 10 gauge no-warp mounting plate |
| Description_FAB |
Barbed Vent Fittings |
| Description_FAB |
Up to 100 PSI |
| Description_FAB |
New Mounting Screws and gasket available separately |
| Description_INV |
400 LPH FUEL PUMP AND HANGER ASSEMBLY |
| Description_ASC |
New Mounting Screws and gasket available separately. *19-170 kit is a thicker gasket and longer screws for use on the GM A Body (Chevelle, GTO, etc....) fuel tanks since they are shallower at the point where the fuel pump is mounted. *19-169 kit for all other EFI fuel tanksConnect your in-tank wire harness to the fuel pump, making sure that the connections are secure. Route the wires through the pass through fitting being sure to leave a little slack to prevent strain or chaffing, Use a 9mm wrench to tighten the upper jam nut on the wire pass through in 1/4 turn increments until the wire no longer moves up and down. BE CAREFULL NOT TO OVERTIGHTEN DOING SO COULD BREAK THE FITTING OR CAUSE A LEAK. |
| Description_DES |
Fuel Pump Assembly - 400 LPH |
| Description_EXT |
Replacement 400 LPH FUEL PUMP AND HANGER ASSEMBLY |
| Description_MKT |
400 LPH Electric Fuel Pump Assembly for Sniper EFI Fuel Tanks. Oven brazed fittings can withstand 100 psi. Genuine Walbro Fuel Pump included. 1/4" NPT Supply and Return line. For a better seal, use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws. |
| Description_FAB |
1/4" NPT Supply and Return Line |
| Description_FAB |
In-Tank Wire Harness |
| Description_FAB |
Made in USA |
| Description_FAB |
Heavy 10 gauge no-warp mounting plate |
| Description_FAB |
Barbed Vent Fittings |
| Description_FAB |
Up to 100 PSI |
| Description_FAB |
New Mounting Screws and gasket available separately |
