Connects SBC and BBC Engines to Tremec GM T-56 and Magnum Transmissions
| Brand |
Lakewood |
| Category |
Transmission and Drivetrain |
| Clutch |
11 inch |
| Color |
Cast |
| Emission Code |
5 |
| Engine |
Chevrolet Small Block Gen I |
| Engine |
GM Big Block |
| Engine Make |
Chevrolet |
| Flywheel |
153 or 168 Tooth |
| Make |
Chevrolet |
| 10 |
Cast Aluminum |
| Product Type |
Bellhousing Kit |
| SFI Approved |
No |
| Transmission |
T56 GM |
| Transmission |
T56 Magnum |
| Transmission Type |
Manual |
| Brand |
Lakewood |
| Category |
Transmission and Drivetrain |
| Clutch |
11 inch |
| Color |
Cast |
| Emission Code |
5 |
| Engine |
Chevrolet Small Block Gen I |
| Engine |
GM Big Block |
| Engine Make |
Chevrolet |
| Flywheel |
153 or 168 Tooth |
| Make |
Chevrolet |
| 10 |
Cast Aluminum |
| Product Type |
Bellhousing Kit |
| SFI Approved |
No |
| Transmission |
T56 GM |
| Transmission |
T56 Magnum |
| Transmission Type |
Manual |
| Description_INV |
ALUM BELLHOUSING SBC/BBC T56 |
| Description_ASC |
Designed for Hydraulic release (throw-out) bearing only (we suggest Hays #82-120 or Holley #319-100).Max recommended clutch diameter is 11 inches. Since some pressure plates are larger than others, fitment issues could occur unless it utilizes a near-stock style pressure plate. |
| Description_DES |
Lakewood Bellhousing Kit - Chevrolet Small-Block and Big-Block Engines |
| Description_EXT |
Connects SBC and BBC Engines to Tremec GM T-56 and Magnum Transmissions |
| Description_MKT |
This Lakewood cast aluminum bellhousing connects Chevrolet Small-Block and Big-Block engines to Tremec T-56 and Magnum transmissions utilizing the standard GM pattern. The bellhousing is intended for both GM cars and trucks and other various swap applications. They are a lightweight cast aluminum design and are meant to be used with hydraulic release bearings only (we suggest Hays #82-120 or Holley #319-100). Also included are a stamped dust cover and Lakewood bellhousing bolt kit #50396 which contains all necessary Grade 8/10.9 Hardware to connect the engine and transmission securely. |
| Description_MKT |
*See LK4000K for the SBC/BBC > TKX/TKO/Muncie/Saginaw mechanical kit. |
| Description_MKT |
*See LK4200K for the SBC/BBC/LS/LT > TKX/TKO/Muncie/Saginaw hydraulic kit. |
| Description_MKT |
*See LK5100K for the Gen III/IV/V LS/LT > GM T-56/Magnum kit. |
| Description_FAB |
Lightweight cast aluminum design similar to the original equipment bellhousings |
| Description_FAB |
Lower cost non-SFI rated option if your project does not require the steel SFI rated unit |
| Description_FAB |
Designed for Hydraulic Release Bearings Only (we suggest Hays #82-120 or Holley #319-100) |
| Description_FAB |
Includes Grade 8/10.9 Hardware |
| Description_FAB |
Works with small-block or big-block applications where use of a GM T-56 or Magnum transmission is desired |
| Description_INV |
ALUM BELLHOUSING SBC/BBC T56 |
| Description_ASC |
Designed for Hydraulic release (throw-out) bearing only (we suggest Hays #82-120 or Holley #319-100).Max recommended clutch diameter is 11 inches. Since some pressure plates are larger than others, fitment issues could occur unless it utilizes a near-stock style pressure plate. |
| Description_DES |
Lakewood Bellhousing Kit - Chevrolet Small-Block and Big-Block Engines |
| Description_EXT |
Connects SBC and BBC Engines to Tremec GM T-56 and Magnum Transmissions |
| Description_MKT |
This Lakewood cast aluminum bellhousing connects Chevrolet Small-Block and Big-Block engines to Tremec T-56 and Magnum transmissions utilizing the standard GM pattern. The bellhousing is intended for both GM cars and trucks and other various swap applications. They are a lightweight cast aluminum design and are meant to be used with hydraulic release bearings only (we suggest Hays #82-120 or Holley #319-100). Also included are a stamped dust cover and Lakewood bellhousing bolt kit #50396 which contains all necessary Grade 8/10.9 Hardware to connect the engine and transmission securely. |
| Description_MKT |
*See LK4000K for the SBC/BBC > TKX/TKO/Muncie/Saginaw mechanical kit. |
| Description_MKT |
*See LK4200K for the SBC/BBC/LS/LT > TKX/TKO/Muncie/Saginaw hydraulic kit. |
| Description_MKT |
*See LK5100K for the Gen III/IV/V LS/LT > GM T-56/Magnum kit. |
| Description_FAB |
Lightweight cast aluminum design similar to the original equipment bellhousings |
| Description_FAB |
Lower cost non-SFI rated option if your project does not require the steel SFI rated unit |
| Description_FAB |
Designed for Hydraulic Release Bearings Only (we suggest Hays #82-120 or Holley #319-100) |
| Description_FAB |
Includes Grade 8/10.9 Hardware |
| Description_FAB |
Works with small-block or big-block applications where use of a GM T-56 or Magnum transmission is desired |
