Your trailer takes plenty of wear and tear on the road without the scuffs, scratches and dents made by loose debris. The truth, however, is that this debris can quickly become a bombardment of damage that is otherwise easily preventable. The LUVERNE Textured Rubber Tow Guard is a simple trailer hitch attachment that provides a reliable barrier between your tow vehicle and trailer. The Tow Guard acts very much like a set of heavy-duty mud flaps. Only instead of merely covering your rear tires, it serves as a full-width wall at the rear of the vehicle, providing superior protection for the trailer. Also, unlike most mud flaps that are designed for permanent installation, the Tow Guard can conveniently be installed or removed as necessary, using a heavy-duty clamp system. This Tow Guard model attaches to virtually any 2" to 3" ball mount shank and maintains full use of your trailer hitch and any electrical components. The LUVERNE Tow Guard is constructed with a strong steel frame and heavy-duty recycled rubber flaps. The steel frame is covered in a highly durable textured black powder coat finish to protect it against scratches, chipping and rust, and the rubber flaps are made from a tough 3/8" thick textured rubber. Installing the Textured Rubber Tow Guard is as simple as bolting it onto a ball mount and mounting it on your receiver hitch. It attaches to the ball mount shank with a clamp mechanism and features cutouts in the steel frame for dual exhaust and for the trailer wiring connection. The Tow Guard is available in a universal width of 72" to fit most full-size pickups and SUVs and in two flap length options, including 15" and 20". When selecting the right length for your vehicle, we recommend a minimum gap of 4" when loaded and a maximum gap of 7" when unloaded. The Tow Guard comes fully factory-assembled and can easily be trimmed for a fully custom fit.
| Box Height in Inches - XA |
0 |
| Box Length in Inches - XA |
0 |
| Box Width in Inches - XA |
0 |
| Container Cases Qty - XA |
0 |
| Container Pallet Qty - XA |
0 |
| Container Unit Qty - XA |
0 |
| Container Volume Cubic Feet - XA |
0.00000 |
| Container Volume Cubic Meter - XA |
0.00000 |
| Container Weight KG - XA |
0 |
| Container Weight Lbs - XA |
0 |
| Finish - XA |
BLACK RUBBER |
| Item Class - XA |
MFL |
| Item Height - XA |
4.000 |
| Item Length - XA |
73.000 |
| Item Width - XA |
22.000 |
| Master Case Height Inches - XA |
0.000 |
| Master Case Inner Pack Qty - XA |
0 |
| Master Case ITF14 |
0 |
| Master Case ITF14 - XA |
0 |
| Master Case Length Inches - XA |
0.000 |
| Master Case Qty - XA |
0 |
| Master Case Volume Cubic Feet - XA |
0.00000 |
| Master Case Weight Lbs - XA |
0.000 |
| Master Case Width Inches - XA |
0.000 |
| Material - XA |
Recycled Rubber |
| Mount Type Description - XA |
Not Applicable |
| Pallet Case Per - XA |
0 |
| Pallet Case Per Layer - XA |
0 |
| Pallet Cases Per - XA |
0 |
| Pallet Cases Per Layer - XA |
0 |
| Pallet Layer of Cases - XA |
0 |
| Pallet Qty - XA |
0.000 |
| Pallet Total Height Inches - XA |
0.000 |
| Pallet Total Weight Per - XA |
0.000 |
| Parcel Allowed - XA |
Yes |
| Product Weight - XA |
0.000 |
| Prop 65 Label Text - XA |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Prop 65 Material - XA |
Di(2-ethylhexyl) phthalate/Di-n-butyl phthalate |
| Prop 65 Reason - XA |
Phthalates |
| Prop 65 Warning Label Type - XA |
Cancer and Birth Defect Causing |
| Prop 65 Warning Y/N - XA |
YES |
| Rate Class - XA |
70.0 |
| Retail Height - XA |
3.000 |
| Retail Length - XA |
73.000 |
| Retail Width - XA |
22.000 |
| Sales Family Code - XA |
FLAPS |
| Sales Family Description - XA |
MUD FLAPS |
| Sales Group Code - XA |
TOWGD |
| Sales Group Description - XA |
TOW GUARDS |
| Shipping Weight - XA |
40.000 |
| Side Application Type Description - XA |
Not Applicable |
| Sub Description - XA |
Tow Guard Long - 20" - 2" to 3" Ball Mount |
| Tariff 301 - XA |
No |
| Title |
20" Long Hitch-Mounted Textured Rubber Tow Guard (Fits 2", 2-1/2" or 3" Shank) |
| Truckload Cases Qty - XA |
0 |
| Truckload Pallets Qty - XA |
0 |
| Truckload Units Qty - XA |
0 |
| Truckload Volume Cubic Feet - XA |
0.00000 |
| Truckload Weight - XA |
0 |
| Description_ABR |
TOWGD |
| Description_SHO |
Tow Guard |
| Description_INV |
Textured Rubber Tow Guard |
| Description_ASC |
Tow Guard Long - 20" - 2" to 3" Ball Mount |
| Description_ASC |
Tow Guard Long - 20" - 2" to 3" Ball Mount |
| Description_ASC |
Convenient hitch-mounted system can be installed or removed as needed |
| Description_ASC |
Full-width barrier offers a superior shield against rocks and other road debris |
| Description_ASC |
Fully factory-assembled for faster, easier installation |
| Description_ASC |
3/8" thick, recycled rubber flaps protect the trailer from unsightly damage |
| Description_ASC |
Textured rubber surface hides scuffs and scratches to maintain a clean finish |
| Description_ASC |
Strong steel frame features a durable, textured black powder coat finish |
| Description_ASC |
Easily clamps on any 2", 2-1/2" or 3" ball mount shank |
| Description_ASC |
Center openings allow access to hitch pin and electrical components |
| Description_ASC |
Universal 72" width to fit most full-size pickups and SUVs |
| Description_ASC |
20" long flaps can be trimmed for a custom fit |
| Description_ASC |
Limited lifetime warranty (three-year finish, one-year parts) |
| Description_ASC |
Assembled in USA |
| Description_DES |
20" Long Hitch-Mounted Textured Rubber Tow Guard (Fits 2", 2-1/2" or 3" Shank) |
| Description_EXT |
LUVERNE 255300 20-Inch Long Textured Rubber Tow Guard Hitch-Mounted Mud Flaps for 2, 2-1/2 or 3-Inch Ball Mount Shank |
| Description_MKT |
Your trailer takes plenty of wear and tear on the road without the scuffs, scratches and dents made by loose debris. The truth, however, is that this debris can quickly become a bombardment of damage that is otherwise easily preventable. The LUVERNE Textured Rubber Tow Guard is a simple trailer hitch attachment that provides a reliable barrier between your tow vehicle and trailer. The Tow Guard acts very much like a set of heavy-duty mud flaps. Only instead of merely covering your rear tires, it serves as a full-width wall at the rear of the vehicle, providing superior protection for the trailer. Also, unlike most mud flaps that are designed for permanent installation, the Tow Guard can conveniently be installed or removed as necessary, using a heavy-duty clamp system. This Tow Guard model attaches to virtually any 2" to 3" ball mount shank and maintains full use of your trailer hitch and any electrical components. The LUVERNE Tow Guard is constructed with a strong steel frame and heavy-duty recycled rubber flaps. The steel frame is covered in a highly durable textured black powder coat finish to protect it against scratches, chipping and rust, and the rubber flaps are made from a tough 3/8" thick textured rubber. Installing the Textured Rubber Tow Guard is as simple as bolting it onto a ball mount and mounting it on your receiver hitch. It attaches to the ball mount shank with a clamp mechanism and features cutouts in the steel frame for dual exhaust and for the trailer wiring connection. The Tow Guard is available in a universal width of 72" to fit most full-size pickups and SUVs and in two flap length options, including 15" and 20". When selecting the right length for your vehicle, we recommend a minimum gap of 4" when loaded and a maximum gap of 7" when unloaded. The Tow Guard comes fully factory-assembled and can easily be trimmed for a fully custom fit. |
| Description_FAB |
Tow Guard Long - 20" - 2" to 3" Ball Mount |
| Description_FAB |
Convenient hitch-mounted system can be installed or removed as needed |
| Description_FAB |
Full-width barrier offers a superior shield against rocks and other road debris |
| Description_FAB |
Fully factory-assembled for faster, easier installation |
| Description_FAB |
3/8" thick, recycled rubber flaps protect the trailer from unsightly damage |
| Description_FAB |
Textured rubber surface hides scuffs and scratches to maintain a clean finish |
| Description_FAB |
Strong steel frame features a durable, textured black powder coat finish |
| Description_FAB |
Easily clamps on any 2", 2-1/2" or 3" ball mount shank |
| Description_FAB |
Center openings allow access to hitch pin and electrical components |
| Description_FAB |
Universal 72" width to fit most full-size pickups and SUVs |
| Description_FAB |
20" long flaps can be trimmed for a custom fit |
| Description_FAB |
Limited lifetime warranty (three-year finish, one-year parts) |
| Description_FAB |
Assembled in USA |
| Description_TLE |
LUVERNE 255300 20-Inch Long Textured Rubber Tow Guard Hitch-Mounted Mud Flaps for 2, 2-1/2 or 3-Inch Ball Mount Shank |
| Description_DEF |
Mud Flap |
