Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
This Part Fits:
| Year |
Make |
Model |
Submodel |
Notes |
| 1960 |
Triumph |
Herald |
Base |
|
| 1960 |
Triumph |
Herald |
Base |
|
| 1961 |
Triumph |
Herald |
Base |
|
| 1961 |
Triumph |
Herald |
Base |
|
| 1962 |
Triumph |
Herald |
Base |
|
| 1963 |
Triumph |
Herald |
Base |
|
| 1964 |
Triumph |
Herald |
Base |
|
| 1965 |
Triumph |
Herald |
Base |
|
| 1966 |
Triumph |
Herald |
Base |
|
| 1967 |
Triumph |
Herald |
Base |
|
| 1952 |
Triumph |
Renown |
Base |
|
| 1953 |
Triumph |
Renown |
Base |
|
| 1963 |
Triumph |
Spitfire |
Base |
|
| 1963 |
Triumph |
Spitfire |
Base |
|
| 1964 |
Triumph |
Spitfire |
Base |
|
| 1964 |
Triumph |
Spitfire |
Base |
|
| 1965 |
Triumph |
Spitfire |
Base |
|
| 1965 |
Triumph |
Spitfire |
Base |
|
| 1966 |
Triumph |
Spitfire |
Base |
|
| 1966 |
Triumph |
Spitfire |
Base |
|
| 1967 |
Triumph |
Spitfire |
Base |
|
| 1967 |
Triumph |
Spitfire |
Base |
|
| 1967 |
Triumph |
Spitfire |
Base |
|
| 1953 |
Triumph |
TR2 |
Base |
|
| 1954 |
Triumph |
TR2 |
Base |
|
| 1955 |
Triumph |
TR2 |
Base |
|
| 1956 |
Triumph |
TR2 |
Base |
|
| 1955 |
Triumph |
TR3 |
Base |
|
| 1956 |
Triumph |
TR3 |
Base |
|
| 1957 |
Triumph |
TR3 |
Base |
|
| 1961 |
Triumph |
TR4 |
Base |
|
| 1961 |
Triumph |
TR4 |
Base |
|
| 1962 |
Triumph |
TR4 |
Base |
|
| 1962 |
Triumph |
TR4 |
Base |
|
| 1963 |
Triumph |
TR4 |
Base |
|
| 1964 |
Triumph |
TR4 |
Base |
|
| 1965 |
Triumph |
TR4 |
Base |
|
Specifications:
| California Proposition 65 |
WARNING: This product can expose you to chemicals including chromium, which is know to the State of California to cause cancer or birth defects of other reproductive harm. For more information, visit www.p65warnings.ca.gov |
| Emission Description |
This Product is Certified by the Manufacturer as being a Non Emissions Sensitive Part and therefore does not require Emissions Certification or Exemption for use on any motor vehicle when used as per Manufacturers Application Guide |
| EmissionFullDES |
4 - This Product is considered a Replacement Part per CARB and EPA regulations for emissions compliance and is legal for sale and use on specified vehicles in all 50 states as stated in Manufacturer’s Application Guide and Installation Instructions. |
| Prop 65 (C, R or CR) |
CR |
| Prop 65 - Short Label |
warning.jpg |
| Prop 65 Yes/No |
Yes |
| Title |
PerTronix 804311 Flame-Thrower Spark Plug Wires 4 cyl 8mm Triumph Type#2 Blue |
| Description_SHO |
Spark Plug Wires |
| Description_INV |
Pertronix Spark Plug Wires |
| Description_DES |
Wires, 8MM Triumph MG (Blue) |
| Description_EXT |
PerTronix 804311 Flame-Thrower Spark Plug Wires 4 cyl 8mm Triumph MG Blue |
| Description_MKT |
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing. |
| Description_FAB |
Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core. |
| Description_FAB |
Low 500 ohm per foot resistance. |
| Description_FAB |
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals. |
| Description_FAB |
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks. |
| Description_FAB |
Fiberglass reinforcing braid for added strength and flexibility. |
| Description_FAB |
Compatible with electronic ignition systems. |
