SPL Parts Front Lower Control Arms SPL FLCA FRS fits 2013-2020 2022-2025 Scion FR-S / Subaru BRZ / Toyota 86 / Toyota GR86

Name: SPL Parts Front Lower Control Arms SPL FLCA FRS fits 2013-2020 2022-2025 Scion FR-S / Subaru BRZ / Toyota 86 / Toyota GR86
Brand: SPL Parts
SKU: SPPSPL FLCA FRS
Price: 1304.99 USD
Availability: InStock

⚠️ Please verify fitment before purchasing. Check the fitment chart below or use the Year/Make/Model tool to confirm this part fits your vehicle.

⚠️ Verify fitment before purchasing. Check the fitment chart below or click the 3 lines in the top left menu, select Home, then use the Year/Make/Model guide.

Brand: SPL Parts

SKU: SPL FLCA FRS

availability: In stock

$1,449.00 USD $1,304.99 USD

Quantity

Subtotal: $1,304.99 USD

Quantity must be 1 or more

Description

Description

The SPL Front Lower Control Arm (FLCA) kit is the ultimate tool for setting up the front end of the GR86 / BRZ / GT86 / FR-S for track, drifting, or street use. Adjust track width, camber, caster, roll center, and anti-dive to increase front grip, gain tire clearance, greatly improve tire wear at the track, reduce body roll, and more, in addition to eliminating all of the bushing flex that causes vague and undesirable handling characteristics in corners and under braking.Camber AdjustmentOne of the biggest improvements to cornering grip you can make is increasing the front camber angle from the weak factory spec (0.0 to -0.75°) to a more proper -2.5° to -4.0° of front camber. This also will significantly improve tire life by reducing heavy wear on the outer portion of the tread that occurs due to insufficient camber angle while cornering. Elongating the lower arm will add more camber without the need for adjustable camber plates or eccentric bolts that could potentially slip. However, pairing the SPL LCAs with camber plates allows you more adjustability options for inner and outer tire clearance as well as elongating the track width while retaining a specific camber angle.Caster AdjustmentAnother important alignment spec is caster angle. Caster angle is particularly helpful on a McPherson strut suspension because it increases the amount of camber that is gained as steering angle is increased. It also improves the centering torque on the steering wheel for straight line stability. The OEM spec is a little over 5.0° which compared to other platforms is a bit on the low side. The SPL arms will allow most setups to run 7.0+° of caster, depending on wheel clearance. The result is better grip mid-corner.

This Part Fits:

Year	Make	Model	Submodel
2013-2016	Scion	FR-S	Base
2013-2020,2025	Subaru	BRZ	Limited
2013-2019,2025	Subaru	BRZ	Premium
2015	Subaru	BRZ	Series.Blue
2019	Subaru	BRZ	Series.Gray
2016	Subaru	BRZ	Series.HyperBlue
2017	Subaru	BRZ	Series.Yellow
2018,2020,2025	Subaru	BRZ	TS
2017-2020	Toyota	86	Base
2018-2020	Toyota	86	GT
2020	Toyota	86	Hakone Edition
2017	Toyota	86	Special Edition
2019	Toyota	86	TRD Special Edition
2023	Toyota	GR86	10th Anniversary Special Edition
2022-2026	Toyota	GR86	Base
2025	Toyota	GR86	Hakone Edition
2022-2026	Toyota	GR86	Premium
2024	Toyota	GR86	TRUENO Edition
2026	Toyota	GR86	Yuzu Edition